十大时时彩大平台_时时彩奖金9.98的平台*信誉官网

郑诚功

十大时时彩大平台讲席教授(2020.02.01-),曾获聘北京航空航天大学特聘教授及台湾阳明大学特聘讲座教授。目前担任世界华人生物医学工程学会候任会长, 新创期刊Medicine in Novel Technology and Devices执行主编, Medical Engineering and Physics,医用生物力学等期刊副主编与编委,也曾经担任世界华裔骨科学会会长及国际SCI期刊Journal of Orthopaedic Surgery and Research主编等学术职务。郑教授的研究成果主要在骨科生物力学与骨科器材的创新研发及转化,郑教授曾获颁美国十大时时彩大平台会士(2017), 美国爱我华大学工程学院杰出校友奖(2016),中华医学会骨科分会海外杰出贡献奖 (2016)等奖项。

研究方向
骨骼肌肉系统生物力学研究,骨科植入物研发,康复医疗创新技术研究
代表性论文专著

1.    Wang H, Zhang M,Cheng CK(2020). Changing the diameter of the bone tunnel is more effective than changing the tunnel shape for restoring joint functionalityafter ACL reconstruction. Frontiers in Bioengineering and Biotechnology,(SCI) DOI: 10.3389/fbioe.2020.00173 

2.    Wang H, Zhang M, Cheng CK (2020). A novel protection liner to improve graft-tunnel interaction following anterior cruciate ligament reconstruction: a finite element analysis. Journal of Orthopaedic Surgery and Research, (SCI) DOI: 10.1186/s13018-020-01755-x

3.    Wong PJ, Song SM, Tsai PH, Nien YY, Jang SC J, Cheng CK, Chen CH (2020). Relationship between the Surface Roughness of Biodegradable Mg-Based Bulk Metallic Glass and the Osteogenetic Ability of MG63 Osteoblast-Like Cells. Materials. 2020, 13: 1188. (SCI)

4.    Cao XY, Chen C, Tian N, Dong X, Xu LJ, Cheng CK (2020). Long-term study on the osteogenetic capability and mechanical behavior of a new resorbable biocomposite anchor in a canine model, Journal of Orthopaedic Translation, 21(2020): 81-90. (SCI)

5.    Cao XY, Fang N, Tian N, Dong X, Cheng CK (2020). Influences of Unidirectional Stretching Process on Mechanical Properties of Absorbable Patch for Rotator Cuff Repair. Journal of Medical Biomechanics, 2020, 35, 1: 27-34.

6.    Wang HZ, Zhang B, Cheng CK (2019). Stiffness and shape of the ACL graft affects tunnel enlargement and graft wear. Knee Surgery, Sports Traumatology, Arthroscopy. (SCI) DOI: 10.1007/s00167-019-05772-0

7.    Cheng CK, Wang XH, Luan YC, Zhang NZ, Liu BL, Ma XY, Nie MD(2019). Challenges of pre-clinical testing in orthopedic implant development. Medical Engineering & Physics,72(2019): 49-54.(SCI)

8.    Wang HZ, Kang HJ, Yao J, Cheng CK, Woo Savio L.-Y. (2019). Evaluation of a magnesium ring device for mechanical augmentation of a ruptured ACL: Finite element analysis. Clinical biomechanics, 68(2019):122-127. (SCI)

9.    Liu Y, Chen HJ, Zhang B, Liu XQ, Xiao J, Cheng CK(2019). A single-component and hemi-hip prosthesis followed up for 43 years-a case report. Medicine, 2019, 98:8(SCI)

10.  Cao XY, Tian N, Dong X, Cheng CK (2019). Implant Coating Manufactured by Micro-Arc Oxidation and Dip Coating in Resorbable Polylactide for Antimicrobial Applications in Orthopedics. Coatings. 2019, 9(5):284. (SCI)

11.  Cao XY, Tian N, Dong X, Cheng CK (2019). Polylactide Composite Pins Reinforced with Bioresorbable Continuous Glass Fibers Demonstrating Bone-like Apatite Formation and Spiral Delamination Degradation. Polymers. 2019. 11(5), 812. (SCI)

12.  Wong CC, Wong PC, Tsai PH, Jang SC, Cheng CK, Chen HH, Chen CH(2019). Biocompatibility and Osteogenic Capacity of Mg-Zn-Ca Bulk Metallic Glass for Rabbit Tendon-Bone Interference Fixation. International Journal of Molecular Sciences, 2019,20(9): 2191. (SCI)

13.  Fang CH, Cheng CK, Qu TB, Zhang JH, Zhang B, Hua Q, Yan SG(2019). “The posterolateral corner-locked technique is applicable in a Chinese population regarding the tibial component rotation alignment in Total Knee Arthroplasty”. The Journal of Knee Surgery, 2019(SCI). DOI: 10.1055/s-0039-1678536

14.  Wang XH, Dong X, Zhu BZ, Lei J, Jin ZM, Suguro Toru, Cheng CK (2019). “A preclinical method for evaluating the kinematics of knee prostheses”. Medical Engineering & Physics, 66(2019): 84-90. (SCI)

15.  Wang XH, Li H, Dong X, Zhao F, Cheng CK (2019). “Comparison of ISO 14243-1 to ASTM F3141 in terms of wearing of knee prostheses”. Clinical Biomechanics, 63(2019):34-40. (SCI)

16. Wei ZY, Zhang GQ, Qi XZ, Wang HZ, Zhang M, Ma XS, Yao J, Cheng CK. (2019) ” Morphological Feature of the Fitting Curves of Proximal Femoral Canal in Adults with Developmental Dysplasia of the Hip” Journal of Medical Biomechanics, 2019,34(4): 417-424.

17.  Ma XH, Yao J, Wang HZ, Qi XZ, Wei ZY, Liu BL, Zhang M, Cheng CK. (2019) “ Finite Element Analysis on Different Geometric Shapes of Tibial Component Pegs in Unicompartmental Knee Arthroplasty”. Journal of Medical Biomechanics,2019, 34(2):186-192.

18.  Zhang M, Sarah Junaid, Thomas Gregory, Ulrich Hansen, Cheng CK (2019).Effect of baseplate positioning on fixation of reverse total shoulder arthroplasty”. Clinical Biomechanics, 62(2019):15-22. (SCI)

19.  Kuang-Ta Yao, Hung-Chan Kao, Cheng CK, Hsu-Wei Fang, Chang-Hung Huang, Ming-Lun Hsu(2019). “Mechanical performance of conical implant-abutment connections under different cyclic loading conditions.” Journal of the Mechanical Behavior of Biomedical Materials, 90(2019):426-432. (SCI)

20.  Wang XH, Song DY, Dong X, Suguro T, Cheng CK. (2019) “Motion type and knee articular conformity influenced mid-flexion stability of a single radius knee prosthesis”. Knee Surgery, Sports Traumatology, Arthroscopy, 27(5), 1595-1603. (SCI)


联系方式

邮箱地址:ckcheng2020@sjtu.edu.cn

办公地址:徐汇校区教三楼MED-X研究院201室

网址:https://www.researchgate.net/profile/Cheng-Kung_Cheng